Table of Contents
Advertisement
Chapter 2.
2.1
Panel description
This section introduces the appearance of Progressive ™ 510W, and its front panel, back
panel is shown in Figure 2-1, Figure 2-2.
Figure 2-1 Diagram of front panel - Progressive WGR-2301
Figure 2-2 Diagram of rear panel - Progressive WGR-2301
1.
LED description
LED
Description
PWR
Power LED
System status
SYS
indicator
Status LED for 3G
USB
Internet access card
WLAN
Wireless Status LED
WAN
Port status indicator
LAN
Port status indicator
http://www.level1.com
Hardware Installation
It is constantly on when the power supply is working
properly.
Flashes in the frequency of 2 times per second, and
the flashing frequency declines when the system
burden is heavy; normally on or off in failure.
LED is on after 3G card is inserted.
On when enabling the wireless feature, and flashes
when sending/receiving wireless data.
When a device is connected to the WAN port, the
LED that corresponds to the port stays lit, and it will
flash if there is flow.
When a device is connected to the LAN port, the
Chapter 2 Hardware Installation
Function
Page 9
Advertisement
Table of Contents
