Wpa-Psk/Wpa2-Psk - LevelOne WGR-2301 User Manual

use the Radius server for authentication and obtaining the key.
WPA version: Sets the security mode this device will use:

Auto: Means that the device can automatically choose WPA or WPA2 safe mode
according to the requests of wireless client.

WPA: Means that this device will use the safe mode of WPA.

WPA2: Means that the device will use the safe mode of WPA2.
Encryption algorithm: It is used to encrypt wireless data, with the options like Auto,
TKIP and AES.

Auto: Means that the device will automatically choose encryption algorithms
according to needs.

TKIP: Means that all wireless data will use TKIP as the encryption algorithm.

AES: Means that all wireless data will use AES as the encryption algorithm.
Radius Server IP: It is used to the identity the authentication of the wireless hosts.
Radius port: The Port number of service used by the Radius server for identifying the
authentication of the wireless hosts.
Radius password: Sets the password for accessing to the Radius service.
Key update cycle: It is the timed update cycle used to specify the key. Value range is
60 ~ 86400, in the unit of seconds. The default value is 3600, which means no update
when the value is 0.

7.2.4 WPA-PSK/WPA2-PSK

Security mechanism: Here, you can select "WPA-PSK /WPA2-PSK", which means
that the device will use WPA-PSK/WPA2-PSK security mechanism. Under this
http://www.level1.com
Figure 7-12 WPA-PSK/WPA2-PSK
Chapter 7 Wireless configuration
Page 57