Table of Contents
Advertisement
configuration -> Identity binding page to enable the identity binding function.
In the case of multi-line session load balancing, NAT sessions in the same application
may be distributed in different lines, which will cause such applications as online bank, QQ,
etc. not to work properly due to change of identity. The identity binding function can
address this issue by binding the sessions in the same application from the same user on
a line. For example, when a user in the Intranet logs in the online bank, if the first session
is assigned to WAN2 port connection line, all the online banking sessions of this user will
go out from the WAN2 port until the user logs out.
Enable identity binding: Enables/disables the identity binding function. If multiple lines
are configured, please enable the device's identity binding function to make normal
use of such apps as QQ, online bank.
6.3
Configuration of LAN port
The device's LAN ports can be configured with 4 IP addresses, and the first default IP
address of the LAN port is 192.168.1.1. If you need to change the LAN IP address in order
to adapt to the existing network, enter the Network parameters > LAN port
configuration page for configuration.
http://www.level1.com
Figure 6-12 Enabling identity binding
Chapter 6 Network parameters
Page 34
Advertisement
Table of Contents
