Table of Contents
Advertisement
0.1
Factory settings
1.
The factory settings of interfaces are shown in Table 1-1.
Parameters
User name
Password
Address of
192.168.1.1/255.255.255.0
LAN port
Address of
WAN port
SSID 2.4G
SSID 5G
2.
The factory user name of the system administrator is admin, and the factory password is
admin (case-sensitive).
0.2
Contact Us
If you have any questions during installation or use, please contact us in the following manners.
Customer service: 0800-011-110
LEVELONE discussions: http://www.level1.com
E-mail support: support@level1.com
http://www.level1.com
Factory Defaults
admin
admin
Dynamic IP access
LevelOne
LevelOne-5G
Table 1-2 Factory settings
Note
User name and password are case
sensitive.
Intranet users can maintain the device
through the address.
For the device's SSID, the wireless
clients must use the same SSID before
connecting to wireless devices. Here,
ABCDEF is the hexadecimal numbers
converted from the device's serial
number.
Introduction
Page 6
Advertisement
Table of Contents
