How Can I Restore The Device To Its Factory Settings - LevelOne WGR-2301 User Manual

A-2 The device is used as wireless client, why can a wireless
connection not be established?
After confirming that the device is powered normally and connected normally, please
check the following configurations of the wireless devices in the network:
1. The "AP SSID" values set by the wireless client are consistent with the SSID of the
associated wireless device or not.
2. The "AP MAC" values set by the wireless client are consistent with the MAC address
of the associated wireless device or not.
3. The safe mode and key set by the wireless client are consistent with those of the
associated wireless device or not.
4. The associated device has already enabled the wireless feature, and has been the AP
mode or not.
A-3 How can I restore the device to its factory settings?
Tip: The following method is used to delete all original settings of the device, so
please use it with care.
Case I: Knowing the administrator password
Under normal circumstances, you can directly enter the System management- >
Configuration management page, and then click <Restore> to manually restart the
device, and the device can be restored to its factory configuration.
Case II: Forget the administrator password
If you forget the administrator password, you will not be able to enter the WEB interface,
and now you can only use the Reset button to restore the factory configuration. Method: In
the process of charged operation, hold down the Reset button for more than 5 seconds,
then release the button, and the device will be returned to the factory settings, and
automatically restart.
http://www.level1.com
Appendix A
Page 193