Pppoe User Status - LevelOne WGR-2301 User Manual

User name: The account (custom, not repeatable) used by users in initiating PPPoE
connections for the PPPoE server to authenticate, the value range is: 1-31 characters.
Password: The password used by users in initiating PPPoE connections for the PPPoE server
to authenticate.
MAC binding: Chooses to bind the user name with the corresponding MAC address. If
binding, only the hosts with the corresponding MAC address can use the account for
accessing to the Internet.

No binding: Means no user name/MAC binding is to be done.

Automatic binding: After the user dials up successfully for the first time, the device will
automatically bind the user name with the dial-up user's MAC address.

Manual binding: Manually enters the MAC address in the MAC address bar for user
name/MAC binding.
Maximum number of sessions for account: Sets the number of users who can simultaneously
use the account for PPPoE connection.
Fixed IP address: The fixed IP address assigned for the PPPoE dial-up user, which must be
within the scope of address pool.
Added to the account groups: the user name will be added to the appropriate account group,
which must be configured in the User management -> User group configuration page.
Charging mode: Checking it means that the PPPoE charging feature is enabled. Here, the
account expiration notification feature is configured in the Behavior management ->
Electronic notification page.
Date of account opening, date of account disabling: Sets the effective date for the dial-up user
using the account.
Upload rate limit, download rate limit: The maximum upload and download rates of the
PPPOE account (0 means unlimited rate).
Note: Fill in the information to be noted. When Note Information is long, the page displays
only 5 characters, and when you position the mouse pointer over the content of the note, the
page will automatically display all the contents of the note.
Tip:
If the PPPoE account is configured with the upload and download rate, then the account will
no longer match the fine rate limit.

9.3.4 PPPoE user status

Enter the User management ->PPPoE server ->PPPoE user connection status page, on which
http://www.level1.com
Chapter 9 Wireless configuration
Page 94