Table of Contents
Advertisement
2.5
Hardware connection
1. Establish a LAN connection
Connect the LAN port of the router and a PC or a hub or a switch in LAN with a network
cable. Or after the device's wireless feature is enabled, connect wireless clients or other
wireless devices to the router over a wireless connection.
2. Establish a WAN connection
Connect the WAN port of the router to the Internet with a network cable, as shown in the
figure below.
3. Connect power source
Before connecting the power supply, make sure that both power supply and grounding are
normal.
Figure 2-3 Establish a LAN connection and a WAN connection
Tip: The above network connection diagram is for reference only. Please configure
the network architecture according to the actual situation and needs.
http://www.level1.com
Chapter 2 Hardware Installation
Page 12
Advertisement
Table of Contents
