Table of Contents
Advertisement
13.2.3.2
Dynamic connection to the gateway
The parameters described in the "gateway to gateway" connections are no longer to be described
again one by one.
Connection mode: Here, dynamic connection to the gateway is selected. In this case, this
device can only be used as the initiator when establishing an IPSec tunnel, and the IPSec
tunnel should have the aggressive mode selected at both ends for the IKE negotiation in the
first phase.
Remote end
Identity ID: Sets the identity ID used to authenticate remote ends.
Identity type: The type of remote identity ID, including three options: "Email address",
"Domain name" and "IP address".
Local
Identity ID: Identity ID sent locally to the remote end for authentication.
Identity type: The type of local identity ID, including three options: "Email address",
http://www.level1.com
Figure 13_18 Dynamic connection to the gateway
Chapter 13 VPN
Page 167
Advertisement
Table of Contents
