Table of Contents
Advertisement
Chapter 10 Wireless configuration
Tip: It is not recommended to enable the flexible bandwidth feature and fine rate limit
feature.
Figure 11_3 Flexible Bandwidth
Enable flexible bandwidth: Checks to enable the flexible bandwidth feature.
Uplink and downlink bandwidth of WAN1: Sets the uplink and downlink bandwidth of
WAN1 applied for from ISP, and the custom maximum value of Gigabit devices can be set to
1000M.
Uplink and downlink bandwidth of WAN2: Sets the uplink and downlink bandwidth of
WAN1 applied for from ISP, and the custom maximum value of Gigabit devices can be set to
1000M.
Enable game acceleration: Checks to enable the acceleration of games.
http://www.level1.com
Page 122
Advertisement
Table of Contents
