Table of Contents
Advertisement
single PC, to implement the communications between the PPTP tunnel remote PC and
the local LAN.
User name: The user name used when the custom client is dialing.
Password: The password used when the custom client is dialing.
Fixed IP address: Sets up the IP address assigned by the PPTP server to the client, and the
address must be in the PPTP server address pool.
Remote Intranet network address: Fills in the IP addresses used by the LAN at the opposite
end of the PPTP tunnel (which may be the LAN IP address of the device at the opposite end
of the VPN tunnel).
Remote Intranet subnet mask: Fills in the subnet mask used by the LAN at the opposite end
of the PPTP tunnel.
13.1.4 PPTP client Settings
Enter the VPN configuration ->PPTP page, and click <Add a client> in the page as shown in
Figure 13_2, to enter the PPTP client page.
parameters for configuring the PPTP client.
http://www.level1.com
The following describes the meaning of the
Figure 13_5 PPTP client
Chapter 13 VPN
Page 149
Advertisement
Table of Contents
