Table of Contents
Advertisement
Telecom routes while Unicom traffic flows on the Unicom routes.
2.
Generally, it is not recommended to modify the MAC address of interfaces. However,
in some cases, the operator binds the MAC of the device, which results in the failure
of the new network device to dial up successfully, and at this time, the MAC address
of the device needs to be modified as that of the original network device.
2.
PPPoE access
Password authentication mode: The mode that operators verify user names,
passwords. Options include: NONE (not to be verified), PAP, CHAP, and EITHER
(automatically negotiate with the peer device on the mode of password
authentication).
Dialing type: The options include auto dialing, dialing on demand, manual dialing.
Auto dialing: The device automatically dials up when it is powered on or the
previous dial-up disconnection occurs.
Dialing on demand: The device will dial up automatically when there is Internet
traffic in the intranet.
Manual dialing: Manual dialing and hanging up. Click <Dial>, and <Hang up> on
the bottom right of the list to implement manual dialing.
Dialing mode: If the dial-up is not successful, try using other modes on the premise of
using the correct user name and password.
http://www.level1.com
Figure 6-3 PPPoE access
Chapter 6 Network parameters
Page 25
Advertisement
Table of Contents
