Faq; How Is An Intranet Computer With Windows 7 System Connected To A Wireless Access Device; Appendix A Faq - LevelOne WGR-2301 User Manual

A-1 How is an intranet computer with Windows 7 system
connected to a wireless access device?
Step one: Configure the TCP/IP for a computer properly
1. Enter the "Start > Control Panel > Network and Internet > Network and Sharing
Center > Change adapter settings" page.
2. Right click on "Wireless network connection" and select "Properties".
3. Double-click "Internet Protocol Version 4 (TCP/IPv4)", to enter into the "Internet
Protocol Version 4 (TCP/IPv4) properties" page.
4. Set the IP address of PC. The IP address is 192.168.1.X (X is any one between 2 and
254), the subnet mask is 255.255.255.0, and the default gateway is 192.168.1.1 (the
LAN IP address of the device), and the DNS server address is provided by operators.
If confirming that the wireless device has enabled the DHCP server function, select
"Obtain the IP address automatically".
5. Select the "Use the following DNS server addresses" option. Type in the IP address
(which can be provided by the ISP) of the DNS server provided by the ISP in the
"Preferred DNS server", and the "Standby DNS server" is optional. When the
preferred DNS cannot be connected, the device automatically uses the standby DNS
server. If the wireless device enables the DHCP server function, "Obtain DNS server
address automatically" can be selected.
6. Click <OK>, and the TCP/IP properties are configured successfully.
http://www.level1.com
Appendix A

FAQ

Appendix A
Page 190