Table of Contents
Advertisement
14.4
Configuration
This section describes the configuration methods of System -> Configuration. In this page, you
can back up the current configuration files to a local PC, import the new configuration file to the
device and restore the factory settings of the device.
1.
Back up configuration files
Click the <Save> bLeveloneon in the above figure, to back up the configuration files to the local
PC, and the format of the configuration file is .xml.
2.
Import configuration files
In the above figure, click < Browse ... >, and select the configuration files stored on the local PC.
Then click <Import> again. If you have checked the check box "Restore factory settings before
import", click the <Import> bLeveloneon, and the device will be restored to the factory settings.
Tip: Do not cut off the device's power supply in loading configuration, to avoid unexpected
errors.
3.
Restore to factory settings of the device
If users need to restore the device to its factory settings, enter into the Systems management ->
Configuration management page, and click <Restore>.
Tip:
1.
It is strongly recommended that before restoring the factory settings, first back up its
configuration files.
2.
After clicking <Restore>, the device continues to run in the current configuration, and it
needs to be restarted manually to restore it to its factory settings.
3.
The user name and password of the device's factory administrator are as follows: admin, and
the default LAN IP address/subnet mask is: 192.168.1.1/ 255.255.255.0.
http://www.level1.com
Figure 14-5 Configuration management
Chapter 14 VPN
Page 180
Advertisement
Table of Contents
