Table of Contents
Advertisement
used for PCs and intelligent devices (or instruments). Using UPnP means simpler, more
choices and more innovative experiences. The network products supporting Universal
Plug and Play need only be physically connected to the network to begin to work.
This section describes the Network parameters ->UPnP page and configuration. When
configuring UPnP in this page, you need to simply enable or disable this feature.
Enable UPnP: Ticking the check box for enabling the UPnP feature.
Internal address: The host IP address when port translation is needed in the intranet.
Internal port: The port number provided by the host when port translation is required
in the intranet.
Protocol: The protocol used by the UPnP port in translation (TCP/UDP).
Peer address: The IP address of the peer host.
External ports: The port number of the device used for port translation. This port is the
service port the device provides to the Internet.
Description: The description information given when an application requests port
translation to the device through UPnP.
Tip: It is recommended not to enable the UPnP feature when this feature is not in use.
http://www.level1.com
Figure 6-23 UPnP configuration
Chapter 6 Network parameters
Page 44
Advertisement
Table of Contents
