Table of Contents
Advertisement
Front Panel Display Management
are displayed higher indicate the port is configured to the setting displayed in
the message Zone. The shorter bar scales under the port numbers indicate the
port is not set to the setting displayed in the message zone.
All ports can be running at the same or different settings. It is useful to check
the port setting to see if it has been running in the desired mode.
Press Next in the MAIN MENU to select the PORT STATUS menu as
shown in Figure 3.18.
Press Enter to go to the port selection menu. The port selection menu
allows users to select "all ports" or "a single port" for monitoring
the port status.
Press Prev and Next to scroll the menu options back and forth.
Press Enter to make a selection. The information will be displayed
automatically.
Status Indicators
The following is a list of the port status indicators:
• 10M PORTS
• 100M PORTS
• 1000M PORTS
• HALF DUPLEX
• FULL DUPLEX
• ENABLED
Figure 3.18 Port Status Menu
3-21
Advertisement
Table of Contents
