Table of Contents
Advertisement
3-12
Exiting the Menu Tree
To exit a sub-menu, cycle through each menu option until a "MAIN MENU"
or "BACK" is displayed in the Message Zone. Press the Enter key to return
to the Main Menu or previous menu level.
Utilization
Monitoring the traffic load is accomplished by simply selecting a port group
and then UTILIZATION from the main menu. While UTILIZATION is
displayed in the message zone the level of utilization for the enabled ports of
this port group is indicated by the bar gauges moving up and down as the
traffic load varies.
The reference for the level of utilization is based on the speed of the port that
is running. For example, a port that is running in 10Mbps half duplex, the
100% stands for the bandwidth of 10M. The following table shows the
relation for each speed:
SPEED
10M half duplex
10M full duplex
100M half duplex
100M full duplex
1000M half duplex
1000M full duplex
Table 3.5
The UTILIZATION menu displays the utilization of all ports, and the port
number indicators indicate the port numbers.
Front Panel Display Management
100% Stands for:
10M
20M
100M
200M
1000M
2000M
Utilization Ratio
Advertisement
Table of Contents
