3-8
Port Indicator Definitions
The following table summarizes the definition of the port indicators.
Port Number
Frame
Dimly on
Off
On
Off
Flashing
Off
On
On
On
Blinking
Power-On Self Test
When the system power is turned on, the system automatically runs an
EEPROM TEST and a PCI TEST. This process is known as the Power-On
Self Test, or the POST. When the POST is complete, the UTILIZATION
mode will be displayed. To display other main menu items press the
Next/Prev keys.
The following table displays the messages that may be display during the
POST process.
Message
Indicates
TFTP DWNLOAD
Conducting TFTP download
TFTP STOP
TFTP download has been stopped by user
TFTP FAILED
TFTP download has failed
RT-IMG FAIL
Runtime image does not exist or is invalid
LOAD RUNTIME
Loading system runtime image
REBOOT
System is going to reboot
WRITE FLASH
Writing downloaded image to ROM
Front Panel Display Management
Indicates
Port enable, link down
Port available, link up
Link up, transmitting/receiving data
Disabled by administrator
Partitioned
Table 3.3
Port Indicators
Table 3.4
POST Messages