Table of Contents
Advertisement
Installation
Console Management Configuration
To start using the Console Management program, first connect an EIA-232
serial cable to a COM port on a PC or notebook computer and to the Console
Port on the front panel of the Switch. Note: do not us a null modem cable.
Navigating the Console Program Screens with the
Tab Key
Use the Tab key to select screen menus.
Press the Enter key after selecting a menu item with the Tab
Enter Key
key to view the selection's sub-menu.
Esc Key
Return to the previous menu.
Select HELP at the bottom of the console screens to view
keyboard commands.
HELP
Terminal Program
Baud: 9600
Parity: None
Data bits: 8
Stop bits: 1
Flow control: None
Terminal Keyboard
2-7
Advertisement
Table of Contents
