Table of Contents
Advertisement
Setting-Up for Console Management
4-7
Power On Self Test
When the Switch is powered up, the Power On Self Test, appears in the
HyperTerminal window as shown in Figure 4.7.
Figure 4.7 Power On Self Test
As the Switch's tests are run through, the test and their results will be
displayed. These tests can also be seen in the Front Panel Display's display
on the Switch. After the tests are complete, the Console program's logon
screen appears.
Note that in some cases, an additional menu will appear before the Login
Screen. See "POST Download Menu" on page 4-11 for more information.
Note that if the Switch was already powered up when HyperTerminal was
started, then the screen will be blank because the Switch's Power On Self
Test will have run already. Therefore, the screen needs to be refreshed in
order for the Login Screen to appear. Press CTRL + R to refresh the screen.
Advertisement
Table of Contents
