Table of Contents
Advertisement
5-26
Spanning Tree Protocol Port
Configuration
The Device Control Menu item, Spanning Tree Protocol Port Configuration,
is shown in Figure 5.19.
Figure 5.19 Spanning Tree Protocol Port Configuration Menu
This menu allows you to monitor and configure the STP settings for each of
the switch's ports.
Spanning Tree Protocol Port Configuration Menu Settings:
• Unit ID States the unit ID of the Switch.
• Port ID Select the port to be configured or viewed.
• Port Join STP Enable or disable joining of STP. Selecting enable allows
the port to join STP.
• STP Port Enable Status Enable or disable the current STP port.
• STP Port ID Read only. States the designated bridge port ID for the
current port's VLAN.
Console Management
Advertisement
Table of Contents
