Related Manuals for LevelOne GSW-0840T
Summary of Contents for LevelOne GSW-0840T
- Page 1 LevelOne GSW-0440T GSW-0840T 4/8-Port 10/100/1000Mbps 11" Gigabit Ethernet Smart Switch User’s Guide Version: 1.0...
-
Page 2: Table Of Contents
Power Socket ... 7 2.4.2 Network Ports... 7 2.4.3 Console Port... 7 INSTALLATION ...8 To locate the switch on a rackmount:... 8 Rackmount placement ... 8 HELPFUL SUGGESTIONS ...9 Prior to Installation ... 9 Half- and Full-Duplex ... 9 Auto-Negotiation ... 9 MAC Address Table ... - Page 3 Port Status ... 13 Port Config ... 14 Mirror Config ... 14 VLAN Config ... 15 Misc Config ... 16 Save Config ... 17 Load Default... 17 PRODUCT SPECIFICATIONS...19...
-
Page 4: Unpacking Information
Thank you for purchasing this LevelOne 11" Smart Switch. Before continuing, please check the contents of the product package. This product package should contain the following items: One (1) Gigabit Ethernet Switch. One (1) Power Cord. One (1) Console Cable Four (4) Rubber Feet. -
Page 5: Product Introduction
Models These LevelOne 11" smart switches provide Four (4) / Eight (8) Gigabit copper ports. Each port is equipped with 2000 Mbps, Full-Duplex, Collision Free Bandwidth. It’s a multi-speed, versatile network device that combines Gigabit, Fast Ethernet, and Ethernet ports in a single device. -
Page 6: Status Leds
To transmit at 1000Mbps requires Category 5 TP cable using Four (4) pairs Twisted-Pair wire. 2.3.3 Status LEDs The Switch comes with a complete range of LEDs. The table below lists each LEDs name, color and a brief description of its function. -
Page 7: Power Socket
Attach the female end of the power cord to the male power connector on the back panel. Attach the male end of the power cord to a grounded power outlet. 2.4.2 Network Ports The Switch provides Four (4) / Eight (8) 1000Base-T/100Base-TX/10Base-T (RJ-45 connector) ports. 2.4.3 Console Port The console port interface conforms to the RS-232 electrical specification. -
Page 8: Installation
The LevelOne 11" Gigabit Ethernet Smart Switch is "Plug-&-Play". It does not require software configuration. Users can immediately use any of the features of this product simply by attaching the cables and turning on the power. To locate the switch on a rackmount: Attach the Four (4) rubber feet included in the product package to the bottom of the Switch, one in each corner. -
Page 9: Helpful Suggestions
Prior to Installation Before installing the Switch and connecting network devices, it is important to plan the network's layout. Things you should consider include: Dedicated Bandwidth: File servers and other high-traffic hardware improve their performance if they have their own dedicated 10Mbps, 100Mbps, or 1000Mbps bandwidth. - Page 10 Switch is powered “Off” or reset. Note: When the network needs reconfiguration, we recommend to restart the Switch first. After all nodes have been moved, Remove the power cord and re-attach it to rebuild the internal MAC...
-
Page 11: Sample Application
The application for these Switches is as a "big pipe" backbone interconnecting file servers with bandwidth-hungry workgroups, departments, and offices. GSW-0840T 1000BASE-T Workstation with 1000Mbps Gigabit Ethernet Adapter 1000BASE-T GSW-0440T 1000BASE-T Workstation with 1000Mbps Gigabit Ethernet Adapter... -
Page 12: Smart Function Configuration
HyperTerminal The Switch has a smart function that you can use to manage your local area network (LAN) more effectively. You can also use the default setting to operate the Switch as a dumb switch. If you want to use smart function, install the Switch as below: Use the “RS-232”... -
Page 13: Configuration Menu
6. Save Config 7. Load Default Now we use the 8 ports switch as an example for explanation; the functions of 4 ports switch is the same as 8 ports switch. When you connect the switch through console port, the first menu you will see is as below:... -
Page 14: Port Config
The port used to monitor other port is called the Snooping port. The port being watched is called the Mirrored Port. The Switch is able to monitor one port at one time. The transmitting and receiving direction can be monitored exclusively. Be sure to activate this function before setting port selection and direction. -
Page 15: Vlan Config
Snooping Port : Monitored Pkts: <+>:Next Item <ESC>:Exit VLAN Config The VLAN Configuration sets up the VLAN configuration of this switch. It supports 4 VLANs for 4 ports switch and 8 VLANs for 8 ports switch. Disable <->:Back <Enter>:Toggle Version A1... -
Page 16: Misc Config
LevelOne GSW-0840T 8-Port Gigabit Smart Switch =========================== 1 VLAN1 2 VLAN2 3 VLAN3 4 VLAN4 5 VLAN5 6 VLAN6 7 VLAN7 8 VLAN8 <+>:Next Item <ESC>:Exit You can Enable or Disable 8 VLAN groups from 1 to 8. “O” means the port is selected in the VLAN group while “X”... -
Page 17: Save Config
LevelOne GSW-0840T 8-Port Gigabit Smart Switch =========================== Aging Time: IP Priority Mapping: Enable Tos0:0 Tos1:0 Tos2:0 Tos3:0 Tos4:0 Tos5:0 Tos6:0 Tos7:0 <+>:Next Item <ESC>:Exit Save Config You can save the configuration, the functions will not disappear when power reset. LevelOne GSW-0840T... - Page 18 LevelOne GSW-0840T 8-Port Gigabit Smart Switch =========================== Waiting ... <+>:Next Item <->:Back <ESC>:Exit <Enter>:Toggle Version A1...
-
Page 19: Product Specifications
Model Standards IEEE 802.3: 10BASE-T IEEE 802.3u: 100BASE-TX IEEE 802.3ab: 1000BASE-T IEEE 802.3x: Flow-Control support Ports Four (4) 1000BASE-T/100BASE-TX/10BASE-T TP Copper Ports Media Support 10BASE-T: Category 3, 4 or 5 TP 100BASE-TX/1000BASE-T: Category 5 TP Bandwidth 1000BASE-T 2000/200/100/20/10 Mbps Forwarding/Filtering Rate 1488095 packets/second per port @ 1000Mbps maximum 148810 packets/second per port @ 100Mbps maximum 14881 packets/second per port @ 10Mbps maximum... - Page 20 Full range Auto-Switching Input voltage: 100 ~ 240 +-10% VAC/ 50 ~ 60Hz Power Consumption 30 W maximum Environment Operating Temperature: 0° ~ 45°C (32° ~ 113°F) Storage Temperature: 0° ~ 70°C Humidity: 10% ~ 90% Non-Condensing Dimensions 265x185x44mm (10.4x7.3x1.7inches) GSW-0840T...
- Page 21 FCC WARNING This equipment has been tested and found to comply with the limits for a Class A computing device pursuant to Part 15 of FCC Rules, which are designed to provide reasonable protection against electromagnetic interference in a commercial environment. Changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.