Table of Contents
Advertisement
5-18
The Switch Configuration Menu displays the settings of the switch and
allows the configuration of several settings.
Switch Configuration Menu
Unit ID
Operational
H/W Ver.
# of Ports
Module Type
Learning Database
Capability
Static Unicast
Address Capability
STP Enable State
Dynamic Entry
Aging Time
Table 5.7 Switch Configuration Menu Options
Switch Port Configuration
In the Device Control Menu item, Switch Port Configuration, there are two
menus used to configure the Switch's individual ports: The Switch Port
Configuration Overview Menu and the Switch Port Configuration Menu.
Switch Port Configuration Overview Menu
The Switch Port Configuration Overview Menu is shown in Figure 5.14.
The unit ID of the Switch
States the operational status of the associated board
States the hardware version of the board
Number of ports in the associated board
The module type of the associated board
The capability of the learning database in the
Switch
The maximum number of static unicast addresses
that the Switch can store
Enables or disables Spanning Tree Protocol for the
Switch
Specifies the aging time of dynamic entries in the
learning database from 10 to 440 seconds. The
default is 300 seconds.
Console Management
Advertisement
Table of Contents
