Table of Contents
Advertisement
Front Panel Display Management
Figure 3.37 System Restart Menu
Press Enter in the SYS RESTART menu to perform a warm restart. You
will see SYS REBOOT in the message zone for a few moments
while the Switch is rebooting.
System Default
The system default menu shown in Figure 3.38, allows users to reset the
device to the original factory configuration.
Press Prev or Next in UNIT CONFIG to select SYS DEFAULT.
Figure 3.38 System Default Menu
Press Enter in the SYS DEFAULT menu to perform the factory reset.
The Switch will then automatically restart, with all settings
reverting to the factory defaults.
3-37
Advertisement
Table of Contents
