Table of Contents
Advertisement
Console Management
Switch Port Configuration Menu Settings
Unit ID
The unit ID of the Switch.
Port Number
Specifies which port is displayed. You can enter a
port number here and press the Enter key to select
different ports.
Interface Type
The network interface type for the port.
Port Description
Specifies the name given to the port that is currently
displayed. You can use up to sixteen characters to
designate a port name.
Operation Status
The operational status of the port
Link Status
The link status of the port
Auto Partition
The auto partition status of the port
Auto Negotiation
The auto negotiation status of the port
Duplex Mode
The duplex mode of the port
Line Speed
The line speed of the port
Admin. State
Enables or disables the current port. If Disable is
selected, the port will be partitioned and the amber
frame enclosing the port number on the Front Panel
Display will become lit.
Speed and Duplex
The speed and duplex of this port configured by the
user
Flow Control
Enable or Disable flow control
Accept Unknown
Specify whether or not to accept unknown unicast
Unicast Pkts
packets.
Table 5.9 Switch Port Configuration Menu Settings
Permanent Address Configuration
In the Device Control Menu item, Permanent Address Configuration, there
are two menus used to configure the Switch's permanent address entries. The
first Permanent Address Configuration Menu is used to view the current
permanent address configurations. The second Permanent Address
Configuration Menu is used to configure new settings.
5-21
Advertisement
Table of Contents
