Subnet Mask; Default Gateway; Set Password - LevelOne GSW-0800TXM User Manual

Front Panel Display Management
Press Next to select SYS RESTART.
Press Enter. You will see SYS REBOOT.
Press Enter to restart the Switch. The reboot will take several moments.
The Switch is now configured in your network.

Subnet Mask

Setting the Subnet Mask involves the same process as setting the IP address.
Please refer to IP Address on page 3-34 for guidance on setting the Subnet
Mask.

Default Gateway

Setting the Default Gateway involves the same process as setting the IP
address. Please refer to IP Address on page 3-34 for guidance on setting the
Default Gateway.

Set Password

The SET PASSWORD menu as shown in Figure 3.36, allows users to set up
the password. The password consists of four numeric digits ("0"-"9"). The
Switch is shipped with the password "0000".
Press Prev or Next in UNIT CONFIG to select SET PASSWORD.
3-35