Spanning Tree Protocol Configuration - LevelOne GSW-0800TXM User Manual

5-24

Spanning Tree Protocol Configuration

The Device Control Menu item, Spanning Tree Protocol Configuration, is
shown in Figure 5.18
Figure 5.18 Spanning Tree Protocol Configuration Menu
This menu allows you to monitor and configure the switch's STP system.
The switch uses one STP system with a single MAC address.
Spanning Tree Protocol Configuration Menu Settings:
• STP Specification Read only. States the IEEE STP specification used.
• STP Base MAC Address Read only. States the MAC address used by
STP to identify the switch.
• STP Designated Root Read only. States the root bridge's bridge
identifier.
• STP Root Port Read only. States the switch's root port.
• STP Root Cost Read only. States the switch to root bridge path cost.
Console Management