Opening Objet Tray Files - Stratasys Objet30 User Manual

Opening Objet
Tray Files
DOC-24333 Rev. A
You can open trays that were saved as objtf files. This is useful, for example,
if you saved a tray after preparing it for printing, and now you want to
make changes before printing it.
To place an object saved as an Objet Tray File (objtf) file on the build
tray:
1. From the File group, click
or—
From the Objet Studio Commands, select
The Open dialog box is displayed.
Figure 5-14: Objet Tray File Open dialog box
2. Select the desired file, and make sure that it appears in the File name
field.
If the Preview check box is selected, the object is displayed.
3. Click .
Open
Objet Studio opens the tray file.
The objtf file is actually a file containing instructions for printing—which stl
files to print and their position on the build tray. Because the objtf file
references the stl files used, they must remain in the same file location as
when the objtf file was saved.
Objet30 User Guide
.
.
Open
5–13