Safety Instruction - HIKVISION DS-2TXS2628-7P/QA/GLT/CH30S80 Quick Start Manual

Safety Instruction

These instructions are intended to ensure that user can use the product
correctly to avoid danger or property loss.
Laws and Regulations
● In the use of the product, you must be in strict compliance with the
electrical safety regulations of the nation and region.
Transportation
● Keep the device in original or similar packaging while transporting it.
● Keep all wrappers after unpacking them for future use. In case of any
failure occurred, you need to return the device to the factory with the
original wrapper. Transportation without the original wrapper may
result in damage on the device and the company shall not take any
responsibilities.
● DO NOT drop the product or subject it to physical shock. Keep the
device away from magnetic interference.
Power Supply
● Please purchase the charger by yourself. Input voltage should meet the
Limited Power Source with 12 VDC, or PoE (802.3af) according to the
IEC62368 standard. Please refer to technical specifications for detailed
information.
● Make sure the plug is properly connected to the power socket.
● The socket-outlet shall be installed near the equipment and shall be
easily accessible.
● DO NOT connect multiple devices to one power adapter, to avoid
over-heating or fire hazards caused by overload.
● DO NOT touch the bare metal contacts of the inlets after the circuit
breaker is turned off. Electricity still exists.
● + identifies the positive terminal(s) of equipment which is used with, or
generates direct current. - identifies the negative terminal(s) of
equipment which is used with, or generates direct current.
Battery
● Risk of explosion if the battery is replaced by an incorrect type. Dispose
of used batteries according to the instructions. Il y a risque d'explosion
5