The Printing Position Is Skewed - Canon LBP7660Cdn Manual

The Printing Position Is Skewed

Perform one of the following solutions according to the cause.
<Cause 1> [Gutter] is specified.
Perform the following procedure in the printer driver.
Solution
You can specify the same setting from the printer's control panel.
"[Setup] Menu ([Layout] Options)"
<Cause 2> [Offset Y] and [Offset X] are specified.
Set [Offset Y] and [Offset X] to "0."
Solution
"Adjusting the Printing Position for All the Jobs"
<Cause 3> "Top Margin" and "Paper Position" in the application are not specified properly.
Specify the settings for "Top Margin" and "Paper Position" in the application properly.
Solution
See the instruction manual supplied with the application.
<Cause 4> The printing position is adjusted in [Adj. Start Position].
Adjust the printing position to an appropriate value in [Adj. Start Position].
Solution
"Adjusting the Printing Position for Each Paper Source"
1. Display the [Finishing] sheet.
2. Click [Gutter].
3. Set [Gutter] to "0."
0258-0E3