Canon LBP7660Cdn Manual page 301

[Copies]
[Paper Size]
[Paper Type]
[Image Orientation]
[Print Position]
[Zoom]
[Enlarge Print Area]
[Print 2-Sided]
[Binding Location]
[Show Warnings]
8
Click [Start Printing].
Do not keep clicking [Start Printing] while the file is transferring. Sometimes it takes time to transfer a file, but if you
keep clicking during the transfer, a file failure may occur and it may be impossible to transfer it.
Specify the number of copies to be printed.
Specify the size of paper to print.
Specify the type of paper to print.
Select the orientation of the images from [Auto], [Vertical] or [Horizontal].
Set the location of the images from [Auto], [Center] or [Top Left]. When [Auto] is selected, if the
print location is specified in the TIFF format data, it will print at the specified location. If the
print location is not set, it will print centered. Since print location is not specified in JPEG
format, if [Auto] is selected, it will print centered.
Specify whether to enlarge or reduce the printing. When it is set to [Auto], it automatically
scales them to match with the effective print area of the paper and prints.
Specify whether to expand the printable area and print.
Depending on the document to be printed, part of the edges of the paper may not be
printed.
When it is set, it will print 2-sided.
Set the binding position on the long side of the paper (long-edged binding) or the short side of
the paper (short-edged binding).
If binding is set from the printer side, the position of the "gutter" is automatically adjusted on the
front and back sides of the paper.
You can select a job processing method for when it detects an Imaging function error.
When it is set to [Print], the error description list is printed at the same time.
[Print] The error description is printed on the paper and the job is terminated.
[Panel] The error message is displayed on the printer's display, and printing stops.
[Off] Even if an error occurs and nothing is displayed, the job is terminated.