Canon LBP7660Cdn Manual page 918

<Cause> The memory for registering overlay forms and custom characters ran out and overflowed.
Press [
Solution 1
Perform the following procedure.
1. Perform a soft reset.
Solution 2
2. After the soft reset, either perform a hard reset or turn the printer back ON, increase memory
capacity and print again. (All data in the memory will be erased.)
Not enough memory for PDF processing.
<Cause> There is not enough memory to process a PDF file.
Perform the following procedure.
1. Perform a soft reset.
Solution 2. Decrease the size of the PDF file or divide it into multiple files, and then print again.
The PDF data may be printed properly by opening it from an application and using the printer
driver.
Not enough memory for XPS processing. <Auto Error Skip>
<Cause> There is not enough memory for XPS processing.
Press [
Solution 1
printed correctly.
If images such as Progressive JPEG are handled inside the XPS, convert them to TIFF or Baseline JPEG
Solution 2
and then print.
Not enough spool memory. <Auto Error Skip>
<Cause> Because spool memory ran out, the printer cannot print.
Press [
Solution 1
printed.
Perform the following procedure.
1. Perform a soft reset.
Solution 2
2. Specify the paper size smaller, and then print again.
Perform the following procedure.
1. Perform a soft reset.
Solution 3
2. Set [Gradation Level] to [Standard], and then print again.
] ( : Online) to continue printing. However, the overflowed data cannot be registered.
"Canceling the Process Currently Being Performed (Soft Reset)"
"Canceling All the Jobs (Hard Reset)"
"Canceling the Process Currently Being Performed (Soft Reset)"
] ( : Online), and continue printing. However, the data that generated the error will not be
] ( : Online) to continue printing. However, the page with which an error is occurring is not
"Canceling the Process Currently Being Performed (Soft Reset)"
"Canceling the Process Currently Being Performed (Soft Reset)"