The Sd Card Cannot Be Used - Canon LBP7660Cdn Manual

The SD Card Cannot Be Used

Perform one of the following solutions according to the cause.
<Cause 1> [SD Card] in the Control Menu options in the Setup menu is set to [Off].
Set [SD Card] to [On], and then perform a hard reset.
Solution "[Setup] Menu ([Control Menu] Options)"
"Canceling All the Jobs (Hard Reset)"
<Cause 2> An error has occurred in the SD card.
Perform formatting in [SD Card Maintenance] in the User Maintenance options in the Setup menu.
If the same error still occurs, replace the SD card.
Solution
"[Setup] Menu ([User Maintenance] Options)"
"Installing SD Card (LBP7680Cx Only)"
<Cause 3> The SD card is not installed properly.
Turn the printer OFF, then check if the SD card is installed properly.
Solution
"Installing SD Card (LBP7680Cx Only)"
<Cause 4> The data cannot be saved on the SD card because there is not sufficient free
space in the SD card.
Delete any unnecessary jobs from among the jobs saved on the SD card.
Solution "Saving a Document in the SD Card in the Printer (Stored Job Print) (LBP7680Cx Only)"
"Remote UI"
<Cause 5> The SD card is write-protected.
Check that the SD card is not write-protected. If the card is write-protected, release the protection, and
Solution
then insert the card.
0258-0RK