Canon LBP7660Cdn Manual page 84

2
Select [Calibration] using [ ] and [ ], and then press [OK].
3
Select an item which you want to adjust from [Color Mismatch Corr.], [Density Control], [Density
Median Cont.], and [Full Calibration] using [ ] and [ ], and then press [OK].
4
Select [Yes] using [ ], and then press [OK].
Calibration is performed.
Performing Calibration Using the Remote UI
1
Start the Remote UI and log on in system manager mode.
"Starting the Remote UI"
2
Select [Calibration] from [Output/Control] under the [Settings/Registration] menu.