Canon LBP7660Cdn Manual page 89

6
Set the [Color Mismatch Corr.] operation that is run immediately after the printer is turned ON.
Select [After Jobs] or [Immediately] with [
After Jobs
Immediately
7
Select [Density Control] using [
8
Set the [Density Control] operation that is run immediately after the printer is turned ON.
Select [Off], [After Jobs] or [Immediately] with [
Off
After Jobs
Immediately
The setting for [First Calibration] is changed.
] or [
It runs color mismatch adjustment after the first print job after the printer is turned ON is
completed.
Print color mismatch is adjusted immediately after the printer is turned ON. If color mismatch
adjustment is run immediately after the printer is turned ON, it will take some time before it is
possible to print.
] and [
] or [
If the printer is used in an environment with wide temperature variation, it may run density
control.
It runs density control after the first print job after the printer is turned ON is completed.
It runs density control immediately after the printer is turned ON. If density control is run
immediately after the printer is turned ON, it will take some time before it is possible to print.
], and press [OK].
], and then press [OK].
], and press [OK].