Canon LBP7660Cdn Manual page 915

Solution
can be printed. Store the data you want to print in a box.
"Setting Restrictions for Print Jobs (LBP7680Cx Only)"
Cannot store. <Auto Error Skip>
<Cause 1> [SD Card] in the Control Menu options in the Setup menu is set to [Off].
Perform the following procedure.
1. [
Solution
2. Set [SD Card] to [On] and print again.
<Cause 2> The number of the jobs exceeded the amount of jobs the printer can save (You can save up
to 100 jobs in the SD card.)
The printer is ready to print by pressing [
Solution 1
Solution 2 Delete unnecessary stored jobs.
<Cause 3> The number of the jobs exceeded the number of jobs you can save in the SD card.
The printer is ready to print by pressing [
Solution 1
Solution 2 Delete unnecessary stored jobs.
<Cause 4> The specified box number is not correct.
Solution Specify the correct box number.
Change to Black, or change paper type settings. <Auto Error Skip>
<Cause> You have attempted to print color transparencies.
Perform the following procedure.
1. Perform a soft reset.
Solution
2. Either prints them in black and white or uses paper other than transparencies.
Check ITB unit. Remove packing material (sheet).
<Cause> There is packing material (sheet) remaining in the output area.
Turn OFF the printer, remove the packing material (sheet) from inside the back cover, and then turn the
Solution
printer back ON.
Check paper size.
<Cause 1> The size of the paper loaded in a paper source is different from the following settings.
Setting for [Output Size] in the [Page Setup] sheet in the printer driver
] Cancel printing by pressing (
"[Setup] Menu ([Control Menu] Options)"
"Canceling the Process Currently Being Performed (Soft Reset)"
: Online).
] ( : Online), ignoring the print data.
] ( : Online), ignoring the print data.