Setting the IP Address Using the Printer's Control Panel
To set the IP address using the printer's control panel, use the following menu hierarchies.
* [Protocol] is displayed when [IP Mode] is set to [Auto].
Pressing [
indicates that the procedure is performed by pressing [
indicates that the procedure is performed by pressing [OK] on the control panel.
IMPORTANT
After setting the IP address
To enable the settings, perform a hard reset or restart the printer.
For details on a hard reset, see
To go back up the hierarchy
Press [
] (
: Back).
About the control panel
For details on the control panel, see
1
Press [
] (
When the message is displayed, press [OK].
You can specify the settings when the printer is either online (the
] (
: Settings) displays the common Setup menu.
"Canceling All the Jobs (Hard
"Control
Panel."
: Settings), select [Network] using [
] or [
] on the control panel.
Reset)."
] and [
], and then press [OK].
Online indicator is on) or offline (the
0258-070
Online