Canon LBP7660Cdn Manual page 416

[Use RAW Printing] (RAW_ENB)
[Use Bidirectional Communication]
(RAW_BIDIR_ENB)
[Use IPP Print] (IPP_ENB)
[SSL]
[IPP Authentication]
(IPP_AUTH_ENB)
[User Name]
(IPP_AUTH_ACCUNT1)
[Password]
(IPP_AUTH_PASSWD1)
[Use WSD Printing] (WSD_ENB)
[Use WSD Browsing]
(WSD_BROWSING)
[Use Multicast Discovery]
(WSD_MULTICAST_DISCOVERY)
[Use HTTP] (HTTP_ENB)
[Use Proxy]
[HTTP Proxy Server Address]
[HTTP Proxy Server Port Number]
[Use Proxy Within Same Domain]
[Proxy Authentication]
[User Name]
[Password]
[Discovery Response]
(DISCOVERY_ENB)
[Scope Name]
(DISCOVERY_SCOPE_NAME)
[Use SNTP] (SNTP_ENB)
[NTP Server Name]
(SNTP_ADDR)
[Polling Interval]
(SNTP_INTERVAL)
*
You cannot use any of the following characters: "(", ")", ",", "!", "<", ">", "=", "~", ";", "+", "*", "\."
TCP/IP (IP v. 6) Settings
: Can be specified
ON, OFF
ON, OFF
ON, OFF
ON, OFF (Fixed at OFF
when a key is not
registered.)
ON, OFF
Up to 24 characters (Must
be entered when using IPP
Authentication)
Up to 24 characters (Must
be entered when using IPP
Authentication)
ON, OFF
ON, OFF
ON, OFF
ON, OFF
ON, OFF
Up to 128 alphanumeric
characters
0 to 99999
ON, OFF
ON, OFF
Up to 24 alphanumeric
characters
Up to 24 alphanumeric
characters
ON, OFF
Scope name to be used for
discovery using utility
software such as NetSpot
Device Installer. (Up to 32
characters
ON, OFF
IP address or host name
Interval for synchronizing
time (1 to 48 hours)
: Cannot be specified
ON
OFF
OFF
OFF
ON
(Blank)
(Blank)
OFF
OFF
OFF
ON
OFF
(Blank)
80
OFF
OFF
(Blank)
(Blank)
ON
default
*
)
OFF
(Blank)
24