Canon LBP7660Cdn Manual page 587

[WINS Resolution] [Off], [On]
[ARP/PING] [Off], [On]
[FTP]
[LPD Print] [Off], [On]
[RAW Print] [Off], [On]
[IPP Print] [Off], [On]
[WSD]
[HTTP] [Off], [On]
[Proxy]: [Off], [On]
[Server Address]
[Port Number]
99999
[FTP Print]: [Off], [On]
[FTP Settings]: [Off], [On]
[WSD Print]: [Off], [On]
*
[WSD Browsing] : [Off],
[On]
[Multicast Discovery]:
[Off], [On]
*
: -
*
: 0 to 80 to
If you want to use WINS Resolution, specify [On].
*
Specify the following settings from the Remote UI.
[WINS Server Address]
[Scope ID]
[SMB Server Name]
[SMB Workgroup Name]
"Configuring the Protocol Settings"
When it is set to [On], you can change the IP address
settings from the client using ARP/PING commands.
When it is set to [On], you can access the printer's FTP
server using the FTP client and print the files.
If you want to perform the settings using FTP Client, set
[FTP Settings] to [On].
*
Specify the settings for [FTP Print User Name] and
[Password] from the Remote UI.
"Configuring the Protocol Settings"
If you want to use LPD Print, specify [On].
*
Specify the setting for [Print LPD Banner Page] from
the Remote UI.
"Configuring the Protocol Settings"
If you want to use RAW Print, specify [On].
*
Specify the setting for [Use Bidirectional
Communication] from the Remote UI.
"Configuring the Protocol Settings"
If you want to use IPP Print, specify [On].
*
Specify the settings for [IPP Authentication], [User
Name], and [Password] from the Remote UI.
"Configuring the Protocol Settings"
If you want to use WSD Print, set [WSD Print] to [On], and
then specify the following settings.
If you want to obtain printer information using WSD,
set [WSD Browsing] to [On]. If you set [WSD Print] to
[On], [WSD Browsing] is not displayed. ([WSD
Browsing] is fixed at [On].)
If you want to set the printer to respond to requests
from multicast discovery, set [Multicast Discovery] to
[On].
When it is set to [On], you will be able to access the
printer using HTTP.
When this is set to [Off], the message appears,
disallowing you to use the Remote UI or perform IPP
printing.
If you want to use the proxy function, specify [On].
Enter the proxy server address to be used for the proxy
function.
Enter the port number of the proxy server to be used for
the proxy function. You can specify between [0] and
[99999].