Performing The Configuration Using The Printer's Control Panel - Canon LBP7660Cdn Manual

Performing the Configuration Using the Printer's Control Panel

When configuring the startup waiting time using the printer's control panel, use the following menu hierarchy.
Pressing [
indicates that the procedure is performed by pressing [
indicates that the procedure is performed by pressing [OK] on the control panel.
IMPORTANT
After performing the configuration
To enable the settings, perform a hard reset or restart the printer.
For details on a hard reset, see
To go back up the hierarchy
Press [ ] ( : Back).
About the control panel
For details on the control panel, see
1
Press [ ] (
When the message is displayed, press [OK].
You can specify the settings when the printer is either online (the
indicator is off).
2
Select [Network Delay Time] using [
3
Specify the setting for startup waiting time using [
Set a delay of between 0 and 300 seconds from the time the printer is turned ON until it begins communicating.
4
Perform a hard reset or restart the printer.
] ( : Settings) displays the common Setup menu.
"Canceling All the Jobs (Hard
"Control Panel."
: Settings), select [Network] using [
] and [
] or [ ] on the control panel.
Reset)."
] and [
Online indicator is on) or offline (the
], and then press [OK].
] and [ ], and then press [OK].
], and then press [OK].
0258-06H
Online