Paper Loading Problems; Paper Does Not Load Into Printer; Paper Is Loaded Skewed (Printing Is Skewed) - Canon BJ-30 User Manual

Paper Loading Problems

If you are having paper loading problems, check the problems and
solutions in the following table. After solving a paper loading problem,
remove the paper and load it correctly. Then press the
set the printer on-line again.
Any of the following paper loading problems may cause the paper to jam
in the printer. See page 116 for complete instructions on how to clear a
paper jam.
Problem
Paper does not load into
printer
Paper is loaded skewed
(printing is skewed)
104
Troubleshooting
Cause
The sheet feeder may contain Make sure the sheet feeder
too many sheets.
Paper may not be inserted
correctly.
Single sheets may not be
feeding correctly.
Paper may not be stacked
correctly in sheet feeder.
button to
ON LINE
Solution
does not contain too much
paper.
Make sure paper is
inserted all the way into
the sheet feeder.
When manually loading
paper, be sure to insert a
single sheet of paper all the
way into the sheet feeder. If
the paper is not inserted far
enough, the printer cannot
load it.
Make sure the stack of paper
is straight in the sheet feeder.
Make sure the right side of
the stack of paper is aligned
against the right side of the
sheet feeder and the paper
guide is aligned against the
left side.
Make sure the paper exit
path is clear.
Chapter 7