Canon LBP7660Cdn Manual page 914

Cannot print with the specified resolution. <Auto Error Skip>
<Cause> The printer cannot process the data because it is too complicated.
Press [
Solution 1
being lowered.
Perform the following procedure.
1. Perform a soft reset.
Solution 2
2. Set [Gradation Level] to [High 1], and then print again.
Cannot print. Reg. Table is full. <Auto Error Skip>
<Cause> The total number of binders inside a single job exceeds 16, or the number of documents inside
a single binder exceeds 16.
Press [
Solution 1
Solution 2 Confirm the data to be printed, then print again.
Cannot read PDF data.
<Cause> An error has occurred when the PDF data was read.
Perform the following procedure.
1. Perform a soft reset.
Solution
2. Print the PDF data in a format which this printer supports again.
Cannot receive PDF data. Set the receivable size. <Auto Error Skip>
<Cause> There is not sufficient free space to print the PDF file using the direct print function.
Press [
size of the PDF file), and then print again.
Solution 1
Optimizing the PDF file
Dividing the PDF file into multiple files
Send the file again using one of the following methods. (LBP7680Cx only)
Insert the SD card into the slot and send the file again.
Solution 2 Send the file directly from the USB memory device.
"Installing SD Card (LBP7680Cx Only)"
"Printing Files Directly from USB Memory Devices (USB Direct Print) (LBP7680Cx Only)"
Cannot start printing because job is restricted. <Auto Error Skip>
<Cause> Print job restrictions are set.
Press [
] ( : Online) to continue printing. In this case, the printer prints with the image quality level
"Canceling the Process Currently Being Performed (Soft Reset)"
"[Setup] Menu ([Quality] Options)"
] ( : Online) to continue printing. However, the data may not be printed properly.
"Canceling the Process Currently Being Performed (Soft Reset)"
] ( : Online) to cancel the job. Afterward, perform the following processes (decreasing the
] ( : Online) to cancel the job. If print job restrictions are set, only the data stored in a box