Canon LBP7660Cdn Manual page 329

[Confirm]
[POP3 RX Interval]
[POP3 RX]
[POP3 Server Port
Number]
If you want to use the SMTP protocol
[SMTP RX]
[SMTP Server Port
Number]
5
Click [OK].
You can enter up to 32 alphanumeric characters.
For confirmation, enter the same [Password] again.
Set the interval for automatically connecting to the server that receives e-mail in minute units.
Receive e-mail at specified intervals and print it automatically.
You can set from [0] (minutes) to [90] (minutes).
When it is set to [0], it does not automatically receive e-mail from the server.
When it is set to [0] and when you want to connect to the server before it automatically
connects to the server that receives e-mail, you can receive e-mail manually.
"Receiving and Printing E-mails Manually"
Specifies whether to enable the e-mail print function.
Specifies the port number for the server which receives e-mails. You can specify the port
number between [0] and [65535].
When it is checked, e-mail is relayed using SMTP protocol and it is automatically received and
printed.
Specifies the port number for the server which receives e-mails. You can specify the port
number between [0] and [65535].