Canon LBP7660Cdn Manual page 920

Remove the jammed paper and set the paper drawer and covers to the original position. If the printer is
not online, press [
"Clearing Paper Jams (Multi-purpose Tray)"
Solution
"Clearing Paper Jams (Paper Drawer)"
"Clearing Paper Jams (Back Cover)"
"Clearing Paper Jams (Output Area)"
IMPORTANT
If paper jams occur at multiple areas at the same time, the areas appear in the display by rotation.
If you removed the jammed paper without opening any cover, be sure to open and close the front cover once, and
then press [ ] (
PDF error.
<Cause> PDF data which this printer cannot process was sent.
Perform the following procedure.
1. Perform a soft reset.
Solution
2. Print the PDF data in a format which this printer supports again.
PDF print range error.
<Cause> The specified print range is incorrect.
Solution Specify the print range correctly, then print again.
Print data version error.
<Cause> A problem is occurring with the fixing unit of the printer.
Press [
Solution 1
Solution 2 Print the data again from the printer driver for the printer.
55 SD Card error. <Auto Error Skip>
<Cause> An SD error has occurred.
If [
Solution 1
print with functions that use the SD card.
Solution 2 Turn OFF the printer, and make sure that the SD card is inserted correctly.
Solution 3 Contact your local dealer for repairs.
56 SD Card error.
<Cause> An SD error has occurred.
Solution 1 Turn the printer OFF, wait for 10 seconds or longer, and then turn it ON again.
] ( : Online).
: Online).
"Canceling the Process Currently Being Performed (Soft Reset)"
] ( : Online) to continue printing. However, the data may not be printed properly.
] ( : Online) is pressed, settings that do not use the SD card are activated. However, you cannot