Print Mode; Printer Features - Toshiba E-STUDIO287CS User Manual

PRINTING FROM Macintosh
 Print Mode
In the Print Mode menu, you can set the way this equipment
handles the print job. This menu allows you to enable various
1
job types such as Private Print, Proof Print and Hold Print.
2
1
2
3
3
4
1) Department Code
Select whether the entry of a department code is required
or not for printing. Select this check box to enable this
4
option if this equipment is managed under department
codes. When you do this, enter a department code in the
box on the right. For your department code, ask the
administrator.
Memo
• Specify a department code in 1 to 63-digit alphanumeric
characters.
5
• A department code must consist of one-byte characters
such as numbers from 0 to 9, letters of the alphabet from
A to Z (in both capital and small ones), a hyphen (-), an
underscore (_), and a period (.).

2) Print Mode

This sets the type of print job.
- Normal — Select this to print a job normally.
6
- Proof — Select this to print the first copy of a multicopy
job and then wait for approval before printing the
remaining copies. If a print job is sent as a proof job,
one copy of the job is printed and the remaining copies
are saved in the proof job queue on this equipment,
which are not printed until you activate printing from the
touch panel display. This option allows you to check the
job's output before printing the remaining copies and
thereby reduce paper waste.
7
- Private — Select this to print a private job. When this
is selected, specify the 5-digit password in the field next
to the box. The print job is saved in the private job
queue on this equipment, and not printed until you
activate printing from the touch panel display of this
equipment. This option is useful when you want to print
a confidential document secured with a password. The
user has to enter the password to print the private job
when activating printing from the touch panel display.
- Hold — Select this option to print a hold job. The print
job, sent as a hold job, is saved in the hold job queue on
this equipment. To perform printing, select the desired
job on the touch panel display and press [PRINT]. This
option is useful to prevent you from forgetting to remove
printed sheets.
3) Distinguish Thin Lines
Select this check box to print thin lines clearly.
4) Do not Print Blank Pages
Select whether you require blank pages to be printed.
Note
• When more than 2 is selected at the [Page per Sheet]
option in the Layout menu, the blank pages will be
printed.
• Pages with a header or footer will be printed even if the
content is blank.
 Printer Features
In the Printer Features menu, you can set special printing
features.
Finishing
In the Finishing menu, you can set the destination and stapling.
1
2
1) Destination
This selects the destination tray.
- Printer's Default — Select this to set the output to the
default tray (that is set as such for raw jobs in the
Machine setting page of TopAccess Administrator's
page).
- Exit Tray — Select this to set the output to the exit tray
of this equipment.
- Tray 1 — Select this to set the output to the tray of the
Finisher.
- 64 -