Toshiba E-STUDIO287CS User Manual page 283

Confirm the settings and press
3
Memo
• The IPv6 addresses acquired from routers are
displayed. Up to seven IPv6 addresses can be
retained.
Note
• When this equipment receives a router advertisement
(RA) from a router with the M flag set to "0", the
DHCPv6 function is disabled. When the router
advertisement (RA) M flag setting is changed from "0"
to "1" with the router settings, reboot this equipment by
using the [POWER] button on the control panel to
enable the DHCPv6 function.
Confirm the settings and press [OK].
4
You will be returned to the NETWORK menu.
Memo
• The IPv6 address acquired from the DHCPv6 server is
displayed.
. Setting the IPv6 protocol automatically (in a
stateful network environment)
On the IPv6 screen, specify the following
1
items as required and press
IPv6 PROTOCOL
LLMNR
ADDRESS MODE Select [STATEFUL] for the IPv6
Link Local
Address
• The link-local address cannot be used to connect to
network places across a router.
• [ENABLE] and [DISABLE] for the LLMNR protocol are
available when you select [ENABLE] for the IPv6
protocol.
- 283 -
Item name
• ENABLE — Press this button
to enable the IPv6 protocol.
• DISABLE — Press this button
to disable the IPv6 protocol.
• ENABLE — Press [ENABLE]
to enable the LLMNR
(Linklocal Multicast Name
Resolution) protocol.
• DISABLE — Press [DISABLE]
to disable the LLMNR protocol.
addressing mode.
The unique address used in IPv6
is displayed.
Note
SETTING ITEMS (ADMIN)
.
Description
1
2
3
4
5
6
7