Check E-Mail; Change User Password - Toshiba E-STUDIO287CS User Manual

SETTING ITEMS (USER)

CHECK E-MAIL

1
You can check for new E-mails (Internet Faxes) on the POP3
server. If a new E-mail is on the POP3 server, the equipment
automatically prints the E-mail data after retrieving them from
the POP3 server.
Note
• To perform this operation, the POP3 server must be
configured using TopAccess. For instructions on how to
2
configure the POP3 server, refer to the TopAccess Guide
"Chapter 8: [Administration] Tab Page".
Memo
• For instructions on how to display the CHECK E-MAIL
screen, see the following page:

P.240 "Accessing the User Menu"
• The equipment can also automatically check for new E-
3
mails (Internet Faxes) on the POP3 server.
4
5
6
7

CHANGE USER PASSWORD

When the MFP Local Authentication function is enabled, users
can change their authentication password that has been
entered in the authentication screen from this menu.
Memo
• [CHANGE USER PASSWORD] is available only when the
MFP Local Authentication function is enabled.
• For instructions on how to display the CHANGE USER
PASSWORD screen, see the following page:

P.240 "Accessing the User Menu"
Change the password.
1
1) Press [OLD PASSWORD] to enter the current
password.
2) Press [NEW PASSWORD] to enter the new
password.
3) Press [RETYPE NEW PASSWORD] to enter the
new password again.
4) Press [OK] to save the new password.
You will be returned to the USER menu screen.
Memo
• When you press [OLD PASSWORD], [NEW
PASSWORD], or [RETYPE NEW PASSWORD], the
on-screen keyboard is displayed.
For details of the on-screen keyboard, see the
following page:

P.331 "On-screen keyboard"
• The input password appears as asterisks (*) in the
[OLD PASSWORD], [NEW PASSWORD], and
[RETYPE NEW PASSWORD] boxes.
- 260 -