Toshiba E-STUDIO287CS User Manual page 290

SETTING ITEMS (ADMIN)
Item name
AUTO 2-SIDE Press the button of the 2-sided mode
MODE copy settings (Available only when the
1
Automatic Duplexing Unit is installed)
that applies by default to originals
placed in the Reversing Automatic
Document Feeder.
• OFF — Press this button to set the
• 1->2 DUPLEX — Press this button
2
• 2->2 DUPLEX — Press this button
• USER — Press this button to
3
SORT MODE Select the default sort mode for copy
PRIORITY jobs. If [STAPLE] is selected, the output
is stapled on the upper left corner by
default. To staple copies, the finisher
must be installed.
COPY screen (2/3)
4
Item name
AUTOMATIC This option allows you to specify
CHANGE OF whether to enable the function to
PAPER SOURCE automatically change the paper source
also when the paper source has been
manually specified for a copy job.
Selecting [ON] makes the equipment
feed the same size of paper from a
5
different drawer when the specified
drawer becomes empty during a copy
job.
This function is always enabled for copy
jobs performed using Automatic Paper
Selection (APS). For details of APS,
refer to the Basic Guide.
6
• When ATTRIBUTE is set to other
7
SUSPEND This option allows you to select whether
PRINTING IF to stop printing when the stapler is
STAPLER EMPTY empty during stapling.
• ON — Press this button to stop
• OFF — Press this button to continue
Description
2-sided mode to [1->1 SIMPLEX].
to set the 2-sided mode to [1->2
DUPLEX].
to set the 2-sided mode to [2->2
DUPLEX].
automatically display the screen to
select the 2-sided mode when
originals are placed in the Reversing
Automatic Document Feeder.
Description
Note
than [NONE] for a drawer, the paper
placed in this drawer is out of the
scope of the Automatic Change of
Paper Source function.
For instructions on how to check and/
or change attribute for a drawer, see
the following page:

P.248 "DRAWER"
printing.
printing without stapling.
Item name
DEFAULT MODE
OF AUTO COLOR
AUTO EXIT TRAY
CHANGE
(CASCADE
PRINT)
COPY screen (3/3)
Item name
ORIGINAL
OUTSIDE ERASE
- 290 -
Description
A setting item for color models. It allows
you to specify the initial mode for the
Auto Color Copy mode.
• ON — Press this button to continue
printing by automatically changing
the exit tray when the original exit
tray becomes full.
• OFF — Press this button to stop
printing when the exit tray becomes
full.
Description
• ON — Press this button to use the
original outside erase function.
• OFF — Press this button to disable
the original outside erase function.