Print Server Mode; Considerations And Limitations; Prerequisites - Toshiba GL-1020 Administrator's Manual

PRINT SERVER MODE

134
8 From the NetWare Environment drop-down list, select the
applicable option:
4.x bindery emulation mode
4.x/5.x/6.x NDS Mode
4.x/5.x Mixed Mode.
9 In the Print Server Name field, enter the name of the Print
Server you created, for example,
10 In the Printer Number field, enter the number assigned to the
printer you created.
For Bindery mode, the number is between 0 and 15; for NDS
mode, the number is between 0 and 254.
11 Scroll to the bottom of the page, then click
12 Proceed to Installing Client Software

Considerations and Limitations

You must enable the IPX/SPX protocol before running the
GL-1020 controller in Print Server mode.
You cannot attach any other printers to a GL-1020 running in
Print Server mode. This supersedes the 255 printer limit
imposed by NetWare.

Prerequisites

Use the NetWare management utility PCONSOLE (for NetWare
4.x bindery mode) or NWAdmin (NetWare 4.x, 5.x or 6.x NDS
mode) to perform the following steps before enabling Novell
print services through TopAccess.
Note: When using NetWare PCONSOLE version 4.x.x.,
toggle between NDS and Bindery modes using the F4 key.
For more information, refer to your Novell NetWare
documentation.
1 Create a new Print Server (PSERVER) on the Novell file
server.
2 Create a new print queue (e.g.,
3 Create the printer (e.g.,
for the Printer Type.
.
GL_2_PS
Save
on page 167.
).
GL_2_Q
and select
GL_2_PR)
GL-1020 Administrator's Guide
.
Other/Unknown