Toshiba E-STUDIO287CS User Manual page 316

SETTING ITEMS (ADMIN)
Proceed with the operation that you
2
require.
1
2
If you selected [EAP-MSCHAPv2], [EAP-MD5] or [EAP-
TLS], proceed to step 5.
3 Select the inner authentication method and
press [Next].
3
Selecting inner authentication method is necessary only
when you selected [PEAP] or [EAP-TTLS] in step 3.
When you selected [PEAP]:
4
5
When you selected [EAP-TTLS]:
6
7
Specify the following items as required and
4
press [Next].
When you selected other than [EAP-TLS]:
When you selected [EAP-TLS]:
Item name
EAP USER NAME Press this button to enter the EAP
PASSWORD
RETYPE
PASSWORD
Use Username
from Common
Name in the User
Certificate
Memo
• When you press [EAP USER NAME], [PASSWORD],
or [RETYPE PASSWORD], the on-screen keyboard is
displayed.
For details of the on-screen keyboard, see the
following page:

P.331 "On-screen keyboard"
- 316 -
Description
user name.
Press this button to enter the
authentication password.
Press this button to enter the
authentication password again.
To set the common name in the
user certificate installed in this
equipment as EAP user name,
press [ENABLE].
Note
• If you set this item to [ENABLE],
you will not be able to enter
[EAP USER NAME].