Fax; Setting The Discard And Reduction Print Option For Rx Print; File - Toshiba E-STUDIO287CS User Manual

FAX

If the FAX Unit is not installed, only [DISCARD] and
[REDUCTION] for [RX PRINT] are available.
Memo
• When the FAX Unit is not installed, the options set in this
menu are applied to Internet Fax reception jobs.
• Depending on the model, [FAX] is available only when the
Scanner Kit or Printer/Scanner Kit is installed.
• For instructions on how to display the FAX screen, see the
following page:

P.261 "Accessing the Admin Menu"
Setting the discard and reduction print
option for RX print
You can set print settings for printing received Internet Fax
originals.
Two print settings are available: discard print and reduction
print.
DISCARD: ON, OFF
• ON — When originals are up to 10 mm larger than the
printing area, the area of the originals that exceeds the
paper printing area is discarded.
• OFF — The received original is printed on two sheets of
paper if its length exceeds the paper printing area.
* For discard print setting details, contact your dealer.
REDUCTION: ON, OFF
• ON — If the received original is longer than the recording
paper, it will be vertically reduced to 90% to fit on the
recording paper.
• OFF — The received original is printed on two sheets of
paper if its length exceeds the recording paper printing
area.
1 On the FAX screen, press [RX PRINT].
The RX PRINT screen is displayed.
Press [ON] or [OFF] for [DISCARD] and
2
[REDUCTION] as required and press [OK].
The registered options can be confirmed in FUNCTION
LIST.

P.339 "FUNCTION LIST (Administrator)"

FILE

You can automatically delete files stored by the Scan to File
operation. Use this menu to set the maintenance function and
periodically delete files stored in the local storage to secure
available hard disk space.
Memo
• For instructions on how to display the MAINTENANCE
screen, see the following page:

P.261 "Accessing the Admin Menu"
1 On the MAINTENANCE screen, enable the
storage maintenance function and
complete the setting.
1) Press [ON].
2) Using the digital keys, enter the number of days
that the system will preserve files before deleting
them.
You can enter 1 to 99 days. To correct the value,
press the [CLEAR] button on the control panel to
delete the input value and re-enter the number of
days.
3) Press [OK] to save the settings.
Memo
• When you press [OFF], press [OK] to complete the
setting.
- 291 -
SETTING ITEMS (ADMIN)
1
2
3
4
5
6
7